1.1 shows the method: digital display is measured directly 
 1.2 shows the error: less than ± 0.5% ± 1 word 
 1.3 set point deviation: less than ± 1 digit (digital display settings) 
 1.4 control point dead band: 0.5% 
 1.5 Cold Junction Compensation: 0 ℃ -40 ℃ 2 ℃ within the error of less than 
 1.6 Time ratio regulation: (1) the proportion with 4% (2) cycle 30 seconds ± 10 seconds 
 1.7 P, I, D regulation: (1) Output 0 ~ 10mA or 4 ~ 20mA 
 (2) load 800 ± 80W 
 (3) P (proportional band) 4% 
 (4) I (integral time) 2.5 
 (5) D (Differential time) 30 seconds 
 1.8 Output pulse signal: amplitude greater than 3V, the width is greater than 40 S pulse or zero phase-shift trigger pulse. 
 1.9 Output contact capacity: AC 220V3A (resistive load) 
 1.10 Temperature Coefficient: 0 ℃ ~ 50 ℃ in the range of deviation from 20 ℃ ± 2 ℃ use, the temperature coefficient of less than 0.05% / ℃ 
 1.11 Power supply: 220V ± 10% 50Hz Power less than 5W 
 1.12 Working environment: Temperature 0 ~ 50 ℃, relative humidity of not more than 85% of non-corrosive material applications. 
 1.13 Dimensions: 160 × 80 × 150, 
 High-end dimensions: 150 × 76 
 1.14 Weight: 0.6 ~ 0.8 kg 
 XMT-102 temperature regulator with a thermocouple Specifications: Model: MT sub-degree No.: CU50 Size: 1500 regulator with a thermocouple