Big good news: in order to repay the old and new customers, the company will be December 1, 2011 to December 31, 2011 at the end of a large part of product promotion. Welcome to the new and old customers to our e-mail or buy. Buying phone: 15303362410/18910282511 Miss Li 



 Micro pump Model: WG13-PLD-1205 (superior products) library number: M238248 



 DC micro-diaphragm pumps and chemical pumps self-priming pump combines the advantages of using a variety of imported corrosion-resistant materials synthesis, self-priming, thermal protection, smooth operation and long-time continuous idling long-time continuous load operation, the volume small, current, pressure, low noise, long life, intricate design, inexpensive, etc., with oil, heat, acid, alkali, corrosion resistance, chemical resistance and other properties. Separate pump and motor, pump body without mechanical parts, no wear and tear. 

 Pump comes with pressure release overflow circuit device. Power, turn on the water switch, the pump began to work; off water switch, the pump continues to work, pump 

 Body of liquid automatic decompression starting back, will not increase the pressure inside the pipe will not hold water mains burst. 
 First, the five major characteristics: 
 1, pressure: up to 5-6Kg (normal spray pressure is only 1-1.5Kg); 
 2, small power consumption: only 1.6-2A. 
 3, 25W 
 4, long life: 5 years motor life. 
 5, anti-corrosion: use of the size of the diaphragm, synthesized by a variety of imported materials. With oil, heat, acid, alkali, corrosion resistance, chemical resistance and other properties. 
 Second, the technical indicators: 
 Voltage: 12V (9-14.4V) 
 About current :1.6-2A 

 Maximum pressure: 0.8Mpa 

 Normal pressure :0.3-0 .6 Mpa, 

 Maximum flow: 3.2L/min 

 Maximum suction 2 m 

 Head up to 5 meters 

 Weight 0.6KG 

 Dimensions: 160X100X60mm 

 Power: 25W (12v) 

 Third, use: 

 1, the left is the pump outlet. 

 2, regardless of positive and negative wire. 

 3, the pump can be placed in any direction. 

 Fourth, the use of notes 

 1, can not be soaked in water. 

 2, the pressure adjustment screw can not be adjusted. Factory, the pressure has been adjusted, if free to adjust, easy to transfer large back pressure, volume 

 Easy to hold in burst water pipes. 

 3, inlet filter must be installed, can not enter the impurities. Otherwise, it is easy to plug the pump, causing pressure to reduce or even no water. 

 Fourth, common faults and exclude: 

 1, there is electricity, water pump does not rotate. Check the motor behind the wire is off. 

 2, pump rotation, water spray, fog but a small amount of pressure reduction. Open pump and check whether there is debris clogging the pump cavity. Motor bracket is loose, tighten the screws. Note that out of the water valve can not be upside down. 

 3, pump for six months or a year later, a small amount of pressure to reduce spray. Open the pump, tighten the motor bracket screws; the chamber and down a small piece mold the direction of exchange, or replacement of a small grinding. 

 Fifth, use of: 

 Widely used in general industrial equipment, medical equipment, chemical equipment, agricultural (lawns and gardens), tourist vehicles, special vehicles, ships, beverage, vehicle cleaning, carpet cleaning, floor cleaning, water purification and water treatment equipment